Where to Put a Thermostat in the House

A thermostat is an invaluable device that is responsible for ensuring that you get your desired temperature. It measures the current indoor temperature and compares it with the set temperature. Once it finds that it doesn’t match, the thermostat signals or commands your central heating or air conditioning system to adjust the temperature in your home.

In winter, it instructs the furnace to heat up the indoor air until it meets the set comfortable, warm temperature. It signals the air conditioner to cool the warm air to the desired temperature during summers. When your HVAC system responds to your thermostat’s commands and meets the set temperature, it kicks off operation until the thermostat signals otherwise.

But there is a catch.

Your thermostat’s efficiency in measuring the right average indoor temperature and communicating to your heating and cooling system depends on its location in the house. Placing it in the right place will enable it to give accurate readings, helping you live in a comfortable indoor atmosphere.

On the other hand, placing it in the wrong place will make it give out inaccurate readings, destabilizing your indoor temperature — for more thermostat placement guidelines and where to put thermostat in house, visit Anderson Air.

So, where is the best place in the house to put the thermostat? Here they are:

On An Interior Wall

The interior wall is one of the best places where to put thermostat in house.

For the most accurate reading, put your thermostat on an interior wall. Putting a thermostat on an interior wall gives more accurate readings because interior walls are a reflection of the average indoor temperature.

On the other hand, external walls better indicate the average temperature outside your house.

In A Frequently Used Room

The most used rooms (living rooms or major hallways) are the ones where people usually converge and spend the most time. And for this reason, you want these rooms to be comfortable in all weather conditions, whether hot or cold.

Install a thermostat in this frequently used space to ensure that this room has the right temperature all year round. On the other hand, avoid placing it in rarely used (empty) rooms like underground basements that are always cooler or the attic (or a room on the topmost floor), which tends to be hotter.

If you place your thermostat in rooms that are way cooler than your common rooms, it will cause the thermostat to command the furnace to produce more heat. And this will cause you to live in uncomfortably hotter temperatures. Aside from the discomfort, the furnace will use more energy, increasing your monthly energy bills.

On the other hand, placing your thermostat in a room higher or warmer than your living room will cause the thermostat to instruct your ac to blow cooler temperatures. And this will cause you to live in colder temperatures.

In a Central Location of Your House

If you have one central thermostat, then you want it placed in the center of your house. Placing a thermostat that controls auxiliary heat in a central house location increases its efficiency in measuring the overall indoor temperature. And based on its measurement, it signals your heating or cooling systems to meet the desired set temperature in all rooms.

5ft Above Your Floor

A 5 ft. height off your floor is one of the places where to put thermostat in house. This distance is sufficient enough for accurate temperature readings.

If you place your thermostat too low, it will always measure lower or cooler temperatures since cooler air always settle down. On the other hand, setting your thermostat very high on the wall will always give you very high-temperature readings. This is because heat always rises. So, your thermostat will never measure the accurate average temperature.

Far From the Source of Cold or Heat

A thermostat placed near the AC or furnace will always give you the wrong readings. This is because its proximity to the source makes it get cooled or heated faster than the other parts or areas of the house.

And once the thermostat achieves its set temperature, it signals the air conditioner or furnace to stop operating, leaving some rooms in the house with uncomfortable temperatures.

For this reason, avoid placing the thermostat near the air vents, fans, windows, doors, and any areas prone to blasts of heat and drafts. These areas have varying volatile changes in temperatures. And these constantly changing temperatures cause the thermostat to constantly switch on and off in an effort to meet the desired temperature. And this wastes energy in the long run.

Why Placing Your Thermostat in the Right Position Matters

Knowing where to put a thermostat in the house advantageously positions it in a location with the most consistent and accurate average temperature reading, enabling you to run your heating and cooling system more efficiently. And as a result, your home will be comfortably warm or cool, depending on your set temperature, without wasting energy.

Note:

In whatever right location you choose, you should place your thermostat in an area that is not obstructed by any household furniture or items. This will ensure a free continuous flow of air around your thermostat, which will enable its sensors to read the indoor temperature accurately. And based on its accurate readings, the thermostat will signal your heating and cooling system when necessary for comfortable living.

Conclusion

Placing your thermostat correctly increases your home’s energy efficiency (this is why you should know where to put thermostat in house).

For added efficiency and automation, install a smart thermostat. It will manage your indoor temperature needs while increasing your energy efficiency by learning your schedules (when you are home) and temperature preferences. It will give you the temperature you need without your active input.

It is worth noting that the right position is futile without the correct installation. To install your thermostats right, contact a trusted HVAC professional to ensure that you enjoy the best of what your heating and cooling systems have to offer all year round.

Here are some other articles related to your search:

• Why do you need a smart thermostat?

• 3 Simple Tips for Lowering Your Energy Bill

• 5 Smart Home Upgrades To Conserve Energy