Is the never-ceasing dripping of a faucet ruining your sleep? It is effortless to get used to the sound, or you may even get accustomed to tuning it out and completely forgetting about the dripping faucet. However, dripping faucets and other household leaks account for nearly 10,000 gallons of water wasted in a year.
A leaky faucet could turn into a full-blown problem if not addressed properly. Fortunately, fixing a leaky faucet is often straightforward. If still, after repairing your faucet, it gives you constant trouble, it's time to replace a faulty tap or determine a permanent solution by calling in your local plumbers. They have access to the suitable tools and expertise to resolve a leaky faucet effectively.
Here are some simple tips on how to fix a leaky faucet:
Determine the Cause First
Before you dive into how to fix a leaky faucet, you must first find the cause behind them. It would be best if you always kept a keen ear and eye on dripping taps. Check out the sink completely to identify the source of the leakage. If you find water pooling around the faucet's body, you should likely tighten up the packing nut or replace the O-Ring.
If the issue is with the faucet handle, you will find the leak in the faucet's spout. First, check what type of faucet is installed. There are two different types, compression faucet and cartridge faucet.
You will have to replace the cartridge faucet for the cartridge, and for the compression faucet, you may have to replace the rubber seals. If you are unsure of the cause, it's best to get a certified plumber's assistance.
Make Sure You Have the Right Tools
To fix a leaky faucet, you need the right set of tools and materials. So you will have to bring out your toolbox and check whether you have the required materials before you get to work.
The main tools you will require are:
- The right replacement parts
- Assortment of screwdrivers
- Rags for cleaning up
- White vinegar
The white vinegar is for cleaning and for loosening the grime build up in the spout. Along with this, you may also need an adjustable wrench to remove the nuts and valves. To gain a better grip on the small parts, you can use slip-joint pliers.
Turn Off the Water Supply
Before you start to work, make sure that you completely turn off the water supply. The shutoff valves will be present under the sink; turn it clockwise to close them. If you don't find the valves under the sink, you turn off the main water valves.
After you shut off the water supply, turn on the faucet for some time to drain the leftover water and to release the pressure.
Don't Forget To Close the Drain Properly.
If you drop any small screws or any other items in the drain, you will have to face another plumbing issue. To avoid this, use plugs or covers to conceal the drain holes. Even if you don't have any specialized tools for that, you can use a rag. Just push the rag down the pipe, and you are all set to go.
Open the System & Check All the Parts
Remove the handle of the faucet to access the problem area. As you remove the parts one by one, ensure that you pay attention to the orientation and order that the pieces were in. Do this to avoid misplacement and mix up while reassembling.
Once you remove the parts, it is time to check where the problem is. Usually, O-rings, rubber washers, and seals are the components responsible for the leak. Check for wear and tear of these parts and if any looks rough, then replace them immediately.
Take This Chance to Clean Up
It is the right time for you to clean up each part before you reassemble the set. Clean all the interior cylinders and seals and check for mineral deposits in the valve seat. Take a cloth and clean the surfaces, and you can loosen those deposits using white vinegar.
Reassemble and Test the Flow
Now it is time to reassemble the faucet. Fix the parts rightly, and if you are stuck in the middle, it is better to call your plumber. Once done, you have to turn on the water slowly. If high pressure is applied quickly, it can cause severe damage to the faucet.
If your faucet is very old and giving you ongoing problems, then you can choose to even replace it instead of repairing it. Now that you know how to fix a leaky faucet, if you still find it difficult or don't have the time, then call up a plumber to resolve the issue effectively.