5 Tips on How to Use Painting Guns

A good paint job on your office or home definitely adds value to its overall aesthetic and improves serviceability. It’s one of the essentials things to consider when building or giving your space a makeover. Considering that, it’s good to give the proper time and effort to choosing the right colors, paint quality and the like.

                  Making sure you get the best paint quality and laying it correctly on your wall does more than make it look great. A thick even later provides protection from elements and other factors making your wall and paint project last longer.

                  Meanwhile, choosing a good paint and using it correctly are both equally important. And while a spray gun helps achieve great results, there are still important things to watch out for. So to help you achieve the best results for your paint project, we’ve gathered these important tips.

1.Keep a consistent color by preparing a large bucket of multiple cans of paint.

Mixing most of your paint in one go helps make sure you keep a consistent color throughout your paint project. See, more often than not, small mixes of paint run out when you get to the middle part of your wall. This then makes any variation in color or shade more visible and noticeable.

To avoid this mishap, always prepare at least a gallon of your paint mixture depending on your estimated paint area. Moreover, also consider to make more than your estimate, especially if you’re not sure how much you need.  Meanwhile, for larger projects, you can find great electric spray guns on the market that support higher capacity.

2.Tape helps you get the perfect edge.

If there’s one thing you should always have handy for any paint project that would be painter’s tape. See, whether you’re using a spray gun or a paintbrush painters tape helps make sure you’re finished edges stay even and straight. 

If the paint seeps through the tape’s adhesion make sure to wipe it off immediately with a damp cloth while wet. Meanwhile, if you find a film build-up between the walls and tape simply cut it off with sharp utility knife. Keeping this in mind makes sure you don’t have to peel off dried pieces of paint from your wall.

3.Smoothen and prime your wall patches before painting.

Patch fillers tend to absorb paint with their porous texture leading to a dull and dappled finish. You’ll notice with your paint’s sheen or gloss, this tends to be inconsistent even when you apply an even color.  To avoid this, make sure to use primer over the patches you make to seal them off.

4.Always start with a clean surface.

Even after you’ve primed and smoothen your wall, make sure to clean the paint area. See, any accumulated dust, grime and oil gets in the way of an even coating. You’ll find this especially true for kitchens and bathrooms that tend to be greasier than other areas.

You can find heavy-duty pre-paint cleaners or use a de-glosser from paint stores for your painting prep. Once you have it ready, apply it with an abrasive pad in a circular motion from the bottom – up.

5.Prevent lap marks.

These stripes of uneven paint layers build-up from partially dried edges of paint. Since they leave an uneven texture, nobody likes having these marks on their wall. Luckily, you can avoid them easily by keeping a wet edge while you paint.

To achieve a wet edge, each layer of paint should be laid before the previous stroke or layer starts to dry. This means run your roller starting from a corner then paint through your wall’s full height. As you do this, make sure to have your roller frame’s open sides facing the painted areas.

Conclusion

                  In summary, proper preparation and caution help make sure you complete a paint project with a smooth and appealing finish. Moreover, the simplest tools help you achieve great results edge to edge while ensuring consistency throughout your project. So make sure to follow these tips on your next paint project for a consistent and beautiful paint finish.